VELATURA

SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
On new wooden surfaces scrape off the knots and then apply wood preservative Diaxyl Extra for protection against fungi and insects.
To fill any cracks or holes use Acrylic Putty.

APPLICATION
Stir well before use. Apply one or two coats by roller or brush diluted up to 3% with Brush Solvent T 300 or airless spray gun diluted up to 3% with Spray Gun Solvent T 350. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch dry after 2-3 hours and can be recoated after 16-18 hours. When the coating is thoroughly dry, use an appropriate abrasive paper to produce a smooth surface, remove the dust and apply any Vitex’s enamel water based or solvent based paint. Drying time depends on weather conditions (humidity and temperature).
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.